军事基础课程体系改革与研究

以新时期军事斗争准备为牵引,改革与创新军事基础课程体系,是我院"4+1"模式新型军事人才对军事基础教学与训练的客观要求.通过重点阐述我院围绕加强学员的素质教育,深化军事基础课程体系改革与研究的思路,为新形势下军事基础课程体系深层次的改革与发展,提供了若干参考.     

一种新型光带通滤波器的设计

设计一新颖的光纤环路作为光带通滤波器,它由３ｄＢ定向耦合器和光纤光栅构成,并用传输矩阵方法对其输入、输出特性进行了理论分析,表明是一种性能优异的带通滤波器,在光通信等领域有着良好的应用前景．     

可压缩流动压力修正方程分析

依据Ｐａｔａｎｋａｒ提出的差分方程稳定性判断的４项基本法则,对可压缩流动的压力修正方程进行了分析,得出压力修正方程系数为正的条件．指出在每一次求解压力修正方程时必须提高解的收敛程度,以保证下一次迭代的差分方程矩阵接近主对角占优．分析了速度离散方程的欠松驰因子对可压缩流压力修正方程的影响．     

基于一种模型的中子星结构

从物态方程出发,利用中子星结构方程计算了中子星的结构。得到了引力质量材M_G=1.27M_θ材,转动惯量I=1.29x10(45)g/cm~2,与观测结果符合较好。     

多波束时域滑窗空时自适应方法及其性能分析

鉴于新一代机载预警相控阵雷达采用多波束且电子波束灵活可控的特点, 本文提出了一种多波束时域滑窗空时自适应处理方法。理论分析与计算机仿真实验表明, 该方法与现有的几种典型空时二维自适应信号处理 （ Ｓ Ｔ Ａ Ｐ） 方法相比, 具有系统自由度低、低速目标检测性能好、鲁棒性强等优点, 并且实现复杂度较低, 便于工程实现。     

含非线性半群的微分包含

研究了形如X＇（t）∈-Ax（t）＋F（t,x（t））,0≤t≤T,X（0）＝x0的微分包含解的存在的局部性和整体性的结果,并在某种条件下研究了解的稳定性。     

舷外有源诱饵反导方法研究

为提高电子战反导水平和导弹突防能力,根据反导电子战装备发展的趋势,介绍了舷外有源诱饵的原理和特点,分析了欺骗干扰、压制干扰和组合干扰3种舷外有源诱饵作战使用的典型模式,从实际试验和仿真2方面研究了舷外有源诱饵对抗反击导弹的效果.研究内容对反导电子战装备的研发和作战使用以及反舰导弹突防研究具有一定参考价值.     

一种RetinaNet与SE融合的航空取证目标检测算法

针对在开展航空侦察取证时缺乏自动化、智能化取证手段的情况,提出了一种基于Reti-naNet与SE融合的航空取证目标检测算法,解决目标尺度变化大、数据集中类别不均衡的问题,并通过SE (squeeze-excitations)模块引入注意力机制进一步改进性能.该改进算法中的特征金字塔网络FPN可有效应对目标尺寸变化较大...     

Coherent systems based on sequential order statistics

The sequential order statistics (SOS) are a good way to model the lifetimes of the components in a system when the failure of a component at time t affects the performance of the working components at this age t. In this article, we study properties of the lifetimes of the coherent systems obtained using SOS. Specifically, we obtain a mixture representation based on the signature of the system. This representation is used to obtain stochastic comparisons. To get these comparisons, we obtain some ordering properties for the SOS, which in this context represent the lifetimes of k‐out‐of‐n systems. In particular, we show that they are not necessarily hazard rate ordered. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011